ALL TYPES OF MATTING

Crossgrip PVC

Specialist Application Matting Roof Matting

Impermeable in all weathers, Crossgrip is highly specialized matting system for flat roofs, gantries and high level walkways, which provides continuous safe access to essential roof top services for maintenance.

When laid flat, it will remain stable in winds up to 60 mph-96 km/h*, however if wind speeds of over 60mph are probable, securing the matting system by welding connecting loops into the vinyl membrane is recommended.

Crossgrip, which is also impact resistant in extremely cold climates, is constructed from non-porous PVC in a unique design of special cross directional top ribs with a ‘diamond cut’ surface to give permanent slip resistance and a surer underfoot grip in a wide range of high level applications. The effective combination of an open grid format and 14 mm (9/16") above ground height enables self-draining and makes Crossgrip at its most efficient wherever water collects or puddles may occur.

Once installed, Crossgrip PVC, which is resistant to bacterial growth and only requires minimal periodic maintenance, such as cleaning and visual inspection for damage or movement, will remain effective for the life of the roof covering below. Compatible with vinyl roofing membranes, the product additionally gives continuous protection to roofing membranes from damaging weather, pedestrian traffic, tools and machinery.

Another major advantage is that Crossgrip is quick and easy to install. The flexibility of the product ensures that it will contour to uneven surfaces or imperfections in the roof structure, which are common where new membrane systems are laid over old ones.

*Loose laid it is effective for winds up to 60mph (96 km/h). In Laboratory conditions on a flat surface, it is stable in wind speeds up to 94mph (150 km/h).

**Minimum order applies to Crossgrip-Blue

Part numbers:

46100500 60cm x 10m Grey
46100540 91cm x 10m Grey
46100570 122cm x 10m Grey
  • Highly effective ‘clean and scrape’ design
  • Open grid allows debris to fall through
  • Heel proof, slip resistant
  • Suitable for all wheeled traffic

W: 60cm (2') 91cm (3') 122cm (4')

L: 10m (33') Roll standard

H: 14mm (9/16")

Wt: 6.30kg/m² (1.29lbs/ft²)

Available in full roll

crossgrip-gallery1 crossgrip-blue crossgrip-gallery3 crossgrip-gallery2 crossgrip-gallery4 crossgrip-grey

Colour:

Crossgrip TPO

Specialist Application Matting Roof Matting

Impermeable in all weathers, Crossgrip TPO (thermoplastic polyolefin) is highly specialized matting system for flat roofs, gantries and high level walkways, which provides continuous safe access to essential roof top services for maintenance. When laid flat, it will remain stable in winds up to 60 mph/96 km/h*, however if wind speeds of over 60mph are probable, securing the matting system by welding connecting loops into the vinyl membrane is recommended.

Crossgrip TPO is constructed from non-porous TPO in a unique design of special cross directional top ribs with an embossed surface to give permanent slip resistance and a surer underfoot grip in a wide range of high level applications. The effective combination of an open grid format and 12 mm (1/2") above ground height enables self-draining and makes Crossgrip TPO at its most efficient wherever water collects or puddles may occur.

Once installed, Crossgrip TPO will only require minimal periodic maintenance, such as cleaning and visual inspection for damage or movement, and will remain effective for the life of the roof covering below. Compatible with TPO, EPDM, PVC and modified bitumen roofs, the product additionally gives continuous protection to roofing membranes from damaging weather, pedestrian traffic, tools and machinery.

Another major advantage is that Crossgrip TPO is quick and easy to install. The flexibility of the product ensures that it will contour to uneven surfaces or imperfections in the roof structure, which are common where new membrane systems are laid over old ones.

Crossgrip TPO comes in white, and is supplied as standard in rolls of 10 m (33') x 75 cm (30").

*Loose laid it is effective for winds up to 60mph (96 km/h). In Laboratory conditions on a flat surface
TPO Grid is stable in wind speeds up to 88mph (142km/h).

Part number:

CGTPO-75-10M-WHITE 75CM X 10M

  • Maximum combined moisture and undershoe dirt removal
  • Stylish appearance
  • Reduces noise levels by 32dB
  • 100% Nylon BCF carpet strips

W: 75mm (2.5')

L: 10m (33') Roll standard

H: 12mm (15/32")

Wt: 6.30kg/m² (1.29lbs/ft²)

Available in full roll

crossgrip-tpo-gallery2 crossgrip-tpo-gallery1 crossgrip-tpo-white

Colour:

Flexi Coin

Multi-Purpose Floor Matting

The large stud flooring, Flexi Coin is an attractive, quick and easy to install sheet vinyl that comes in roll format for the convenient coverage of large areas with one economical piece of material.

Available in a standard 1.6mm (1/16") thickness in 2 solid colors, this multi-purpose range provides a practical and functional alternative to conventional floorcoverings in light duty applications.

Functional vinyl alternative to conventional flooring

  • Attractive large stud design
  • Multi-purpose, sheet vinyl alternative
  • Convenient 25 metre 82' lengths for quick and easy coverage of large areas
  • Widths of 98cm (38") and 152cm (60")
  • Economical and ecological ‘Eco’ versions made from recyclable factory materials

Functional vinyl alternative to conventional flooring

  • Attractive large stud design
  • Multi-purpose, sheet vinyl alternative
  • Convenient 25 metre 82' lengths for quick and easy coverage of large areas
  • Widths of 98cm (38") and 152cm (60")
  • Economical and ecological ‘Eco’ versions made from recyclable factory materials

W: 98cm (3.2')

L: 25cm (82')

H: 1.6mm (1/16")

Wt: 2.4Kg/m² (0.5lbs/ft²)

Available in full roll

flexi-coin-blue flexi-coin-grey

Colour:

Flexi Dot

Multi-Purpose Floor Matting

Flexi Dot is part of the comprehensive Fleximat product range. It has been developed for light duty applications where an attractive matting, which provides quick and easy coverage of large areas, is required.

Supplied therefore in roll format for convenient ‘one-piece’ installation, it is also easy to cut to size and shape for fitting.

The contemporary small ‘dot’ pattern of Flex Dot is a main feature of the product, which comes in a choice of bright colors to complement and enhance different interiors.

Overall Flexi Dot is a highly functional and multi-purpose matting with a good degree of slip resistance, which will also resist chemicals, oils and acids.

Small dot pattern in a vinyl format for light to medium-duty applications

  • ‘Dot’ pattern range for an attractive, contemporary finish
  • Highly functional and multi-purpose with a good degree of slip resistance
  • Quick and easy coverage of large areas
  • ‘Eco’ version manufactured from reprocessed factory scrap
  • Convenient roll format, easy to cut to size and shape

W: 98cm (3.2')

L: 25m (82')

H: 1.6mm (1/16")

Wt: 2.4Kg/m² (0.5lbs/ft²)

Available in full roll

flex-dot-black flexi-dot-red flexi-dot-blue

Colour:

Flexi Tred

Multi-Purpose Floor Matting

Flexi Tred is a matting solution for dry areas in demanding heavy duty industrial applications such as manufacturing and production areas and commercial environments where there is a high level of pedestrian traffic.

This extremely durable, multi-purpose matting has a specially textured rib surface pattern to provide extra slip resistance and underfoot comfort and a composition that gives a high degree of chemical, oil and acid resistance.

With an electrical resistance meeting DIN/EN 60243-1 and a breakdown voltage of 27kv, Flexi Tred is also designed to withstand high levels of electrical interference making it particularly suitable for use in the electronics and electrical industries.

For where prolonged standing is an issue and an anti-fatigue matting is required, Plastex offers Zed Tred® - a product which is a combined composition of Flexi Tred thermally fused onto a patented foam base.

  • Extremely durable, heavy duty sheet vinyl matting for demanding applications
  • Textured slip resistant surface for added safety
  • Electrical insulation, breakdown voltage 27kv
  • Chemical, oil and acid resistant

W: 100 (3.3')

L: 10m (33') Roll standard

H: 4mm (5/32")

Wt: 4.2Kg/m² (0.8lbs/ft²)

Available in full roll

flexi-tred-blue

Colour:

Flexigrid

Slip Resistant Matting

Flexi Tred is a matting solution for dry areas in demanding heavy duty industrial applications such as manufacturing and production areas and commercial environments where there is a high level of pedestrian traffic.

This extremely durable, multi-purpose matting has a specially textured rib surface pattern to provide extra slip resistance and underfoot comfort and a composition that gives a high degree of chemical, oil and acid resistance.

With an electrical resistance meeting DIN/EN 60243-1 and a breakdown voltage of 27kv, Flexi Tred is also designed to withstand high levels of electrical interference making it particularly suitable for use in the electronics and electrical industries.

For where prolonged standing is an issue and an anti-fatigue matting is required, Plastex offers Zed Tred® - a product which is a combined composition of Flexi Tred thermally fused onto a patented foam base.

  • Extremely durable, heavy duty sheet vinyl matting for demanding applications
  • Textured slip resistant surface for added safety
  • Electrical insulation, breakdown voltage 27kv
  • Chemical, oil and acid resistant

W: 60cm (2'), 91cm (3')

L: 5m (16') Roll standard

H: 20mm (7/8")

Available in full roll

flexigrid-gallery1 flexigrid-black

Colour:

Floorline

Slip Resistant Matting Barefoot and Wetside Matting

Floorline is of hollow tubular PVC construction, which makes it light, easy to handle and simple to roll up for cleaning purposes.

This versatile matting is easy to cut to size and shape, can be loose laid and will contour over uneven floor surfaces.

Thanks to its benefits, Floorline open grid matting is suitable for leisure as well as workplace (light duty) applications.

For light duty and domestic wet side areas:

Soft underfoot and decorative to look at, yet hardwearing in light duty applications, Floorline is an ideal matting solution which can be used in wet areas where slip resistance is required and fatigue reducing properties are a benefit.

For light industrial and commercial areas:

Economical and multi-purpose, Floorline matting also has wide ranging uses in other light industrial and commercial applications where an attractive, slip resistant and cushioned matting with a hard wearing surface is required.

The cushioning effect of Floorline reduces the risk of damage to items that are accidentally dropped. Its open grid format dissipates spillages and permits easy drainage. This effective combination makes this a popular matting for clubs, restaurants, bars and hospitality areas where staff have to stand, spills are likely and breakages possible.

Because it is lightweight and easily handled for storage it can be equally well used in seasonal premises or for occasional purposes.

Part numbers:

46105000 60cm x 10m Black

46105050 91cm x 10m Black

46105052 91cm x 10m Red
46105055 91cm x 10m Blue

Light, economical and comfortable

  • Soft cushioned surface reduces breakages
  • DIN 51130 R11 slip resistant, can be used in wet areas
  • Ideal for normal footwear
  • Open grid dissipates spillages and facilitates drainage
  • Multi-purpose economical product: easy to handle and easy to clean

W: 60cm (2') 91cm (3')

L: 10m (33') Roll standard

H: 6mm (1/4")

Wt: 3.76kg/m² (0.77lbs/ft²)

Available in 1/2 and full roll

floorline-gallery3 floorline-gallery2 floorline-gallery1 floorline-black floorline-blue floorline-beige floorline-grey floorline-red floorline-green floorline-white

Colour:

GATEWAY

Entrance Matting

Gateway is available in a standard 14mm (9/16") thickness and also in a low profile version of 10mm 3/8". At this height, Gateway 10 aligns with standard ceramic floor tiles and carpets in recessed applications to avoid the need and expense of creating a deeper mat well in an existing subfloor in order to accommodate the entrance matting system.

  • Highly effective ‘clean and scrape’ design
  • Open grid allows debris to fall through
  • Heel proof, slip resistant
  • Suitable for all wheeled traffic

W: 60cm (2') 91cm (3') 100cm (3.3') 122cm(4')

L: 10m (33') Roll standard

H: 14mm (9/16")

H*: 10mm (3/8")

Wt: 10.89kg/m² (2.23lbs/ft²)

Wt*: 8.79kg/m² (1.80lbs/ft²)

Also available in 1/2 rolls and custom cuts

gatewayblack gateway-grey gateway-brown gateway-gallery1 gateway-gallery2

Colour:

Gateway Brush Hog

Entrance Matting

An aggressive external brush scraper system developed to remove the heaviest soiling from boots, shoes and wheels as they approach a building. It tackles snow, slush and mud and heavy levels of dirt; working well as a stand-alone module for entrances, or as part of an entrance flooring system combined with other Gateway products such as Gateway Plus, that will continue the cleaning and drying process within a building.

Gateway Brush is the most efficient first dirt barrier to a building as vigorous, parallel lines of soft nylon brushes are designed to remove maximum amounts of moisture and under-shoe dirt generated by people and wheeled traffic.

Manufactured from high quality, flexible PVC, which is easy to cut to size and shape, even around revolving doors, Gateway Brush can be loose laid and will naturally contour over paved areas and uneven surfaces whilst remaining stable.

  • Maximum combined moisture and undershoe dirt removal
  • Stylish appearance
  • Reduces noise levels by 32dB
  • 100% Nylon BCF carpet strips

W: 60cm (2') 91cm (3') 122cm (4')

L: 10m (33') Roll standard - (122cm - 5m roll only)

H: 14/19mm (9/16"-3/4")

Wt: 12.89kg/m² (2.64lbs/ft²)

Also available in 1/2 rolls and custom cuts

gateway-brush-hog-gallery1 gateway-brush-hog-gallery2 gateway-brush-hog-gallery3

Colour:

Gateway Plus

Entrance Matting

By using Gateway Plus alone, or with other Gateway products, even the busiest pedestrian traffic flow areas will look their best, whilst internal floorings remain protected thus reducing cleaning costs. Purpose designed for interior use, Gateway Plus is both slip resistant and wheelchair friendly. A choice of over 3 colour combinations offers the exact mix of aesthetic elegance and superior performance.

Used extensively in retail, commercial, educational and healthcare entrance areas, Gateway Plus will complement any internal design scheme.

Gateway Plus's open grid vinyl construction, effectively removes and retains soil and moisture from underfoot, is heel proof, will not impede walking sticks and prevents 'judder' of wheeled traffic.

The system is of one-piece vinyl construction and is therefore both quiet underfoot and ideal for use in conjunction with under floor security systems.

Available in standard 14mm grid height and also in low profile 10.5mm height, which allows it to fit quickly and seamlessly with current flooring.

  • Maximum combined moisture and undershoe dirt removal
  • Stylish appearance
  • Reduces noise levels by 32dB
  • 100% Nylon BCF carpet strips

W: 60cm (2') 91cm (3') 100cm (3.3') 122cm(4')

L: 10m (33') Roll standard - (122cm - 5m) roll only

H: 14/16mm (35/64" - 5/8")

H*: 10.5/12mm (13/32" - 1/2")

Wt: 10.89kg/m² (2.23lbs/ft²)

Wt*: 8.79kg/m² (1.80lbs/ft²)

Also available in 1/2 rolls

Custom cuts available

gateway-plus-gallery1 gateway-plus-black gateway-plus-grey

Colour:

Gateway SB

Entrance Matting

Gateway SB is the perfect flooring solution for applications that require an entrance matting system but do not have a recessed mat well. Its 6.5mm overall height and solid backing allow it to deliver this.

The matting's ribbed pattern scrapes dirt off shoes, which is effectively contained by its solid back. The hollow ribbed construction makes it light to handle during installation, yet sturdy enough to be heel and wheel proof. Due to Gateway SB's lesser overall weight, we recommend adhering it to the sub-floor in high volume traffic areas.

The ribbed top surface and solid backing combination allows for the containment of debris out of the traffic area, whilst the solid backing facilitates bonding to subfloors.

Also available in Black.

Surface mounted 'scrape and clean' entrance flooring system

  • 6.5mm high open ribbed solid back construction
  • Hollow construction for lighter weight
  • Heel and wheel proof system
  • High R11 rating for slip resistance under DIN 51130
  • Eliminates need for recessed mat well
  • Containment of dirt
  • Available in Cut to Length

W: 100cm (3.3")

L: 10m (33') Roll standard

H: 6.5mm (17/34")

Wt: 7.13kg/m² (1.46lbs/ft²)

Also available in 1/2 rolls and custom cuts

gateway-sb-gallery3 gateway-sb-gallery2 gateway-sb-gallery1 gateway-sb-grey

Colour:

Gateway SB Plus

Entrance Matting

With a solid backing and 8mm overall height, Gateway SB Plus’s has added absorbent inserts with monofilament scrapers that remove moisture at the entrance, providing clean and dry all in one movement.

Gateway SB Plus’s flexible PVC composition allows for easy cutting on site to fit any shape.

Its hollow ribbed construction makes it light to handle during installation yet sturdy enough to be heel and wheel proof.

Additionally, the 6.5mm overall height eliminates the requirement for a recessed mat well.

The ribbed top surface and solid backing combination allows for the containment of debris out of the traffic area, whilst the solid backing facilitates bonding to subfloors.

Also available in Charcoal Grey.

Surface mounted 'scrape, clean and dry' entrance flooring system

  • 6.5mm open ribbed, solid back construction
  • Hollow construction for lighter weight
  • Specially formulated absorbent inserts
  • High R11 rating for slip resistance under DIN 51130
  • Heel and wheel proof system
  • Containment of dirt
  • Eliminates need for recessed mat well
  • Available in Cut to Length

W: 100cm (3.3")

L: 10m (33') Roll standard

H: 6.5/8mm

Wt: 7.13kg/m² (1.46lbs/ft²)

Also available in 1/2 rolls and custom cuts

gateway-sb-plus-blackgrey

Colour:

Heronair

Slip Resistant Matting Anti-Fatigue Matting

Heronair’s open grid construction and 10mm surface height copes effectively with water and spillage dissipation.

Its tubular two layer structure also provides excellent comfort and insulation where cold, hard floors are otherwise an issue, especially where workers are standing for lengthy periods.

It is made from hardwearing, flexible PVC hollow bars welded to cross directional underbars to provide good insulation where cold, hard floors are otherwise an issue.

Due to its flexible vinyl construction, it is easy to cut to shape and will lay on top of any type of floor surface without fixing. It will also naturally contour to uneven and irregular surfaces.

Heronair Photoluminescent

A specialised matting manufactured to the same specification as Heronair and incorporating a photoluminescent strip, which marks escape routes if lighting fails.

Part numbers:

46101000 60cm x 10m Black
46101001 60cm CTL Black
46101005 60cm x 10m Red
46101010 60cm x 10m Dark Grey
46101015 60cm x 10m Green
46101050 91cm x 10m Red
46101055 91cm x 10m Blue
46101070 91cm x 10m Black
46101071 91cm CTL Black
46107000 60cm x 5m Black
46107001 91cm x 5m Black

A hardwearing and versatile work horse

  • Two layer hollow construction for maximum comfort and cushioning
  • Insulating & fatigue reducing
  • Lightweight, economical and easy to clean
  • High slip resistant rating & self-draining (R11, V10 under DIN 51130 testing)
  • Contours to uneven floor surfaces
  • Made from recycled material
  • Available in Cut to Length - Black only

W: 60cm (2') 91cm (3') 122cm (4')

L: 10m (33') Roll standard

H: 10mm (3/8")

Wt: 3.90kg/m² (0.80lbs/ft²)

Also available in 1/2 rolls
Custom cuts available

heronair-gallery1 heronair-gallery2 heronair-gallery3 heronair-black heronair-blue heronair-grey heronair-white heronair-photoluminescent

Colour:

Herongripa

Slip Resistant Matting Specialist Application Matting

Developed primarily for the food processing and preparation industries, Herongripa is a specialised vinyl matting solution, which is resistant to animal fat and oils.

The matting provides a safe and warm matting for workers to stand on, whilst animal fat deposits will not adversely affect the surface.

Herongripa is made from a very hardwearing and long lasting vinyl in a widely spaced open grid format, which allows any waste or by-products to simply fall through the matting. This feature keeps standing areas free of potentially slippery and hazardous matter and contributes to the maintenance of a hygienic environment in food production areas.

The one piece hardwearing vinyl roll format allows for ease of rolling up during cleaning routines. Anti-bacterial and anti-fungal additives ensure continued hygienic performance.

Vinyl matting resistant to animal fat and oils

  • Tough vinyl, resistant to animal fat
  • Wide open grid allows waste to fall through
  • Underfoot safety and comfort for standing areas
  • Anti-bacterial and anti-fungal additives
  • Hard wearing, long lasting
  • Roll format for one piece large area coverage

W: 60cm (2') 91cm (3') 122cm (4')

L: 10m (33') Roll standard

H: 15mm (5/8")

Wt: 4.3kg/m² (0.88lbs/ft²)

Also available in 1/2 rolls

herongripa-gallery1 herongripa-orange

Colour:

Heronrib

Barefoot and Wetside Matting

Heronrib is the ultimate sports and leisure matting system for wet areas with instant 4-way drainage and anti-bacterial and anti-fungal additives to provide maximum barefoot hygiene.

Exceptionally warm and comfortable to stand on, Heronrib has a specially embossed slip resistant surface and antibacterial and anti-fungal additives for assured underfoot hygiene in areas where bacteria tends to harbour.

Made from strong, non-porous PVC sections with channeled underbars, Heronrib will automatically selfdrain even the largest amounts of water. It is therefore not only perfect for preventing a splash but also for making a splash of colour around swimming pools, saunas and Jacuzzis using one or more of Heronrib’s eye-catching colours.

A permanent and effective barefoot wet area solution that is hygienic, UV resistant and easy to clean and maintain whether used indoors or outdoors.

Part numbers:

46101732 60cm x 10m Ocean Blue
46101733 60cm CTL Ocean Blue
46101734 60cm x 10m Oxford Blue
46101735 60cm CTL Oxford Blue
46101736 60cm x 10m Red
46101737 60cm CTL Red
46101738 60cm x 10m Grey
46101739 60cm CTL Grey
46101752 91cm x 10m Ocean Blue
46101753 91cm CTL Ocean Blue
46101754 91cm x 10m Oxford Blue
46101755 91cm CTL Oxford Blue
46101756 91cm x 10m Red
46101758 91cm x 10m Grey
46101759 91cm CTL Grey
46101772 122cm x 10m Ocean Blue
46101773 122cm CTL Ocean Blue
46101774 122cm x 10m Oxford Blue
46101775 122cm CTL Oxford Blue
46101776 122cm x 10m Red
46101778 122cm x 10m Grey
46101779 122cm CTL Grey
  • Barefoot comfort & safety
  • Effective inside or out
  • Anti-bacterial and anti-fungal additives for permanent hygiene
  • Effective, multi-directional water drainage
  • Slip resistant certified DIN 51097 Classification C
  • Loose lay yet stable underfoot
  • Available in Cut to Length

W: 60cm (2') 91cm (3') 100cm (3.3') 122cm (4')

L: 10m (33') Roll standard

H: 10.5mm (13/32")

Wt: 5.86kg/m² (1.20lbs/ft²)

Also available in 1/2 rolls
Custom cuts available in the following widths: 2', 3', 4'

  • Some colours available in full roll only
  • Please contact us for details


heronib-gallery1 heronib-gallery2 heronib-gallery3 heronib-gallery6 heronib-gallery4 heronib-gallery5 heronib-gallery7 heronib-gallery8 heronib-gallery9 heronib-gallery10 heronib-gallery11 heronib-gallery12 heronib-blush heronib-charcoalgrey heronib-forestgreen heronib-oxfordblue heronib-oceanblue heronib-mullberryred

Colour:

Herontile

Barefoot and Wetside Matting

The Herontile system has a simple click together joining mechanism designed to cover large floor areas seamlessly and easily.

It provides a hygienic, safe and attractive surface with permanent anti-fungal and antibacterial additives.

Herontile is made from an Ethylene Vinyl Acetate (EVA) composition to guarantee softness and comfort. It also has a circular surface embossing for enhanced slip resistance and stands 15mm (5/8") high on strong support legs so that water disperses well underneath.

Four bright, stable and appealing colour options are complementary to interior schemes.

Part numbers:

46101300 Ocean Blue
46101320 Light Grey
46101310 Light Blue
46101330 Beige
  • Hygienic, slip resistant barefoot wet area tiling
  • Anti-fungal and anti-bacterial additives
  • Open grid, broad slats and 15mm (5/8") height for efficient liquid drainage
  • Simple, click together joining mechanism for easy coverage of large floor areas
  • Soft Ethylene Vinyl Acetate (EVA) composition for added barefoot comfort

W: 33cm (13') per tile

L: 33cm (13') per tile

H: 15mm (5/8")

Wt: 13kg (29lbs) per box

27 tiles/box - available in full boxes only

herontile-gallery2 herontile-gallery1 herontile-gallery3 herontile-beige herontile-blue herontile-grey herontile-lightblue

Colour:

Pillogrid

Barefoot and Wetside Matting Specialist Application Matting

Purpose designed for wave simulators/surfing machines, the large open grid and soft vinyl of Pillogrid combines phenomenal drainage with a soft landing.

Placed over metal grates at the back and front of such machines, Pillogrid matting keeps surfers safe while riding wave simulators.

Large roll format further adds to safety by removing the need for joints in action areas.

Can be supplied in factory welded panels for quick and easy installation.

  • High volume drainage
  • Soft vinyl construction
  • Hollow tube cushioning format
  • 'D' profile for maximum weld strength
  • Supplied in rolls or fabricated panels

W: 91cm (3') 100cm (3.3')

L: 10m (33') Roll standard

H: 20mm (7/8")

Wt: 7.1kg/m² (1.45lbs/ft²)

Available in full roll

pillowgrid-blue

Colour:

Pillomat

Anti-Fatigue Matting Specialist Application Matting

Pillomat is an all-purpose cushioned matting of tubular construction with air-filled hollow sections providing a lightweight working surface matting solution, which is ideal for a wide variety of industries - from food retailing to general manufacturing where it is widely used on bench tops. The impact resistant nature of this product is a bonus wherever valuable components, tools or other items are stored or handled. It is also extremely effective as a lining for shelving and compartments.

Continual air flow and fluid drainage is enabled by the open grid format of Pillomat, while its smooth non-porous surface is hygienic and easy to clean. Additionally it acts as a noise free covering, resists chemicals, oils and acids and is quick and easy to install.

Part numbers:

46100600 60cm x 15m
46100620 91cm x 15m

Lightweight plastic matting of tubular construction

  • Lightweight cushioned matting
  • Suitable for working surfaces/storage areas
  • Tubular construction, resists impact and protects components
  • Open grid allows air circulation and drainage of fluids
  • Smooth, hygienic and easy to clean surface, resists contamination
  • Available in Cut to length
  • Part numbers:
46100600 60cm x 15m
46100620 91cm x 15m

W: 60cm (2') 91cm (3')

L: 15m (49') Roll standard

H: 8mm (5/16")

Wt: 3.32kg/m² (0.68lbs/ft²)

pillomat-gallery1 pillomat-gallery2 pillomat-gallery3 pillomat-beige pillomat-black pillomat-grey

Colour:

Vynagrip

Slip Resistant Matting

Increase safety, comfort and productivity in the workplace with Vynagrip, a slip resistant, anti-fatigue matting solution which can be relied upon to perform in wide ranging heavy duty commercial and industrial applications.

Vynagrip is made from non-porous, flexible PVC in welded grid format with an above ground height of 15mm (5/8") for maximum self-draining of liquids and debris. Automatic drainage combined with an extra ‘aggressive’ diamond tread for increased slip resistance make Vynagrip especially effective wherever oil, water, liquid and debris spillages are likely.

VYNAGRIP PLUS: Vynagrip with the additional benefit of yellow bands to mark routes and delineate areas.

BLACK VYNAGRIP: An environmentally-friendly product made from 100% recycled material.

Part numbers:

46107020 60cm x 5m
46102500 60cm x 10m
46102501 60cm CTL
46107021 75cm x 5m
46102510 75cm x 10m
46102511 75cm CTL
46107022 91cm x 5m
46102520 91cm x 10m
46102521 91cm CTL
46107023 122cm x 5m
46102530 122cm x 10m
46102531 122cm CTL

The ultimate slip resistant matting solution

  • Scientifically proven to reduce standing fatigue
  • Extra ‘aggressive’ tread for increased slip resistance
  • Open grid system for rapid self-draining
  • Exceptionally hard wearing, hygienic and easy to clean
  • Cushioning, thermal and noise reducing properties
  • Chemical, oil and acid resistant
  • Available in cut-to-length

W: 60cm (2') 75cm (2.5') 91cm (3') 122cm (4')

L: 10m (33') Roll standard

H: 15mm (5/8")

Wt: 7.1kg/m² (1.45lbs/ft²)

Modules: 2'x3' | 3'x5' | 2'x10' | 3'x10'

Custom cuts available in the following widths: 2', 3', 4'
Also available in 1/2 rolls

vynagrip-black vynagrip-blackandyellow vynagrip-blue vynagrip-red

Colour: